Model — 1L-PS10
The 180° Wall Mount PIR Sensor is a highly efficient, fully automatic indoor security and courtesy light controller. Designed to manage up to 1200W, this sensor not only enhances security but also maximizes energy savings.
With its high sensitivity and advanced integrated circuit, this device ensures reliable performance. As night falls, the built-in passive infrared (PIR) motion sensor instantly detects movement and activates the connected lighting system, providing immediate illumination when needed. Meanwhile, during the day, the built-in photocell sensor takes over, automatically deactivating the lights to prevent unnecessary energy consumption.
By seamlessly switching between motion detection and daylight sensing, this smart energy-saving switch delivers optimal efficiency and convenience, making it an ideal solution for both residential and commercial spaces.
Specifications
- Operating Voltage: 220-250VAC/50Hz
- Load Capacity: 300W (standard) / 1200W (maximum)
- Ambient Light Range: 3-2000 (Adjustable)
- Load Type Compatibility: Bulbs, LED lights, CFLs, Fans, etc.
- Detection Distance: 10-12 meters
- Detection Angle 180°
- Installation Height: 2.2-4 meters
- Motion Detection Speed: 0.6-1 m/s
- Power Consumption: 0.1W (static) & 0.4W (working)
- Working Humidity: Less than 93% RH
- Adjustable Delay: 10 seconds to 7 minutes
1L-PS10 – Wall Mount PIR Motion Sensor 180°
Original price was: ₹550.00.₹450.00Current price is: ₹450.00. (+18% GST extra)
PIR Sensor QS-05B
Original price was: ₹400.00.₹360.00Current price is: ₹360.00. (+18% GST extra)Key Features of the 180° Wall Mount PIR Motion Sensor
- 180° Motion Detection: Engineered to detect motion across a wide 180° field, this sensor provides reliable coverage, ensuring enhanced security and efficiency.
- Built-in Photocell: Intelligently detects daylight levels to distinguish between day and night, automatically optimizing energy consumption.
- LUX & Time Control: With easy-to-adjust settings, you can customize both light intensity and duration—set it once, let it work, and save energy effortlessly.
- Re-trigger Function: Keeps lights on continuously by resetting the timer with every new motion detection, so you never get left in the dark.
- Adjustable Time Delay: Choose the perfect timing—from a quick 10-second response (±3 sec) to a steady 7-minute delay (±2 min)—so your lighting adapts to your needs.
- Stand-alone 220V AC Operation: No complicated wiring required! Simply plug it in and start saving energy instantly.
- DIY-Friendly Installation: Effortlessly install this sensor with user-friendly design, making it the perfect choice for both professionals and DIY enthusiasts who appreciate both simplicity and efficiency.
Troubleshooting and Solutions:
Load Not Functioning:
- Ensure the power source and load are connected correctly.
- Check if the load is operational.
- Adjust the working light settings to match ambient light conditions.
Weak Sensitivity
- Remove any obstacles blocking the sensor’s signal reception.
- Reduce the ambient temperature if it is too high.
- Make sure the detection field includes the induction signal source.
- Install the sensor at the recommended height as per the instructions.
- Move in the correct direction for optimal detection.
Sensor Fails to Turn Off the Load Automatically:
- Check for continuous signals in the detection field.
- Adjust the time delay setting if it is at the maximum.
- Verify that the power supply matches the specified requirements.
- Install the sensor at the recommended height as per the instructions.
Installation Tips Wall Mount PIR Motion Sensor 180° :
Since the detector reacts to temperature changes, avoid the following:
- Do not point the detector towards highly reflective surfaces, such as mirrors.
- Avoid installing the detector near heat sources, like heating vents, air conditioning units, or lights.
- Do not direct the detector towards objects that may move with the wind, such as curtains or tall plants.